PVA Release Film Options:Case (4 Gallons) Apply a minimum of three

Apply a minimum of three layers of Non-Silicone High Temp Paste Wax

Steel nipple fittings are threaded for both male and female attachment to equipment and tools

Works well with complex shapes

User selectable °C or °F

PVA Release Film Options:Case (4 Gallons) Apply a minimum of threePVA, or polyvinyl alcohol, should be used with our #1016 Partall Wax for the easy release of parts from a mold. Wax should be applied to the mold, 34 layers thick, and buffed to a high gloss. Once the final layer of wax has dried, PVA should be applied with the following considerations: PVA can be brushed on, but for best results, apply with a spray gun, 1218 inches away from substrate. Generally, apply in three layers: the first, a thin mist,